FOR OPTIMAL RESULTS 

The standard application rate is 1 gallon per acre in sufficient water to apply the desired rate.

• If already using N-P-K products: It is recommended that N-P-K applications be reduced by at least 50% when using World Harvest, SumaGrow® products.
• If Soil Organic Matter (OM) is low (i.e. heavy sand or heavy clay soils) increase the initial application rate by 0.5 gallon for all applications.
• Avoid extreme temperatures. Store at 40°F - 80°F.
• Always properly calibrate your sprayer prior to application rate per acre is achieved.
• Apply in late afternoon or at sundown to ensure optimal absorption.
• For second application: Foliar application is suggested.
• For all trees, spray twice the canopy.

  
CO-APPLICATION 

• World Harvest, SumaGrow® can be co-applied with your irrigation water through a metered irrigation  system.
• Product can also be co-applied with liquid Nitrogen and with herbicides.
• DO NOT CO-APPLY SumaGrow® with fungicides or fumigants.  

AGITATION 

• The product should be gently agitated prior to application. In smaller containers, simply shake the container prior to loading into sprayer.
• With bulk barrels and totes, agitate prior to transferring to sprayer (can use air wand or paddle agitator). 

  
  1.   Organic Applications  
  2.   Cotton  
  3.   Field Corn, Sweet Corn, Milo  
  4.   Soybeans  
  5.   Summer Grasses (Grazing)  
  6.   Summer Grasses (Hay)  
  7.   Wheat, Oats, Rye, etc.  
  8.   Okra, Pepper, Eggplant  
  9.   Tomato
10.   Beans: Lima, Green, Kidney, etc.
11.   Leafy Greens
12.   Cucumbers, Pumpkins, Squash, Watermelon, etc.
13.   Irish Potato and Sugar Beet
14.   Grapes, Blueberries, Blackberries, etc.  
15.   Strawberries
16.   Peanuts
17.   Rice
18.   Trees and Shrubs
19.   Seed Treatment, Seedlings, and Transplants
20.   Cassava Plants
21.   Mango Trees
22.   Durian Trees
23.   Rambutans
24.   Longan
25.   Dragon Fruit
26.   Rubber Trees
27.   Pomegranate 


1.   Organic Applications

In a previously traditional chemical operation, it is recommended that all application rates be increased 100% for the first application year. This increase is recommended because the build-up of soil nutrients in organic fields is typically significantly less than found in traditionally fertilized fields.

2.   Cotton
              Step 1:  Apply 0.5 gallon (2 liters) per acre at “Planting”. Preferably “In Row”.
                Step 2:  Apply 0.5 gallon per acre at “Pin Head” square.

 

3.  Field Corn, Sweet Corn, Milo
                 Step 1:  Apply 1 gallon per acre at planting.
                 Step 2:  Apply 0.5 gallon per acre approximately 4 weeks after planting.
                 Step 3:  Can make optional third application just prior to silking (7-10 days prior). This application would be best made aerially.

 
4.  Soybeans
                 Step 1:  Apply 0.5 gallon per acre at planting.

                 Step 2:  Apply 0.5 gallon per acre approximately 4 weeks after initial application.

 
5.  Summer Grasses (Grazing)
                 Step 1:  Apply 0.5 gallon per acre around Spring green-up.

                 Step 2:  Apply 0.5 gallon per acre 4 to 6 weeks later.

6.  Summer Grasses (Hay)   
                 Step 1:  Apply 0.5 gallon around Spring green-up.

                 Step 2:  Apply 0.5 gallon after each cutting.

7.  Wheat, Oats, Rye, etc.   
                 Step 1:  Apply 0.5 gallon at planting.

                 Step 2:  Apply 0.5 gallon at flag leaf emergence.

 
8.  Okra, Pepper, Eggplant  
                 Step 1:  Apply 0.5 gallon per acre at planting.

                 Step 2:  Apply 0.5 gallon per acre 3 to 4 weeks after initial application.

 
9.  Tomato                 
                 Step 1:  Apply 0.5 gallon per acre at planting. If transplanting, dip roots in solution equivalent to 6 oz. World Harvest, SumaGrow® 
                                per gallon of water prior to transplanting.

                 Step 2:  Apply 1 qt. per acre every 7 to 10 days through peak harvest.

10.  Beans: Lima, Green, Kidney, etc  
                 Step 1:  Apply 0.5 gallon per acre at planting

                 Step 2:  Apply 0.5 gallon per acre 3 to 4 weeks after initial application.

 

11.  Leafy Greens

                  Step 1:  Apply 0.5 gallon per acre at planting.

                  Step 2:  Apply 0.5 gallon per acre 3 weeks after emergence.

 

12.  Cucumbers, Pumpkins, Squash, Watermelon, etc.

                  Step 1:  Apply 0.5 gallon per acre at planting.

                 Step 2:  Apply 0.5 gallon 3 to 4 weeks after initial application.

          

13.  Irish Potato and Sugar Beet

                 Step 1:  Apply 0.5 gallon per acre at planting.

               Step 2:  Apply 0.5 gallon per acre 3 to 4 weeks after initial application.

 

14.  Grapes, Blueberries, Blackberries, etc.

              Step 1:  Apply 0.5 gallon per acre at early bud break.

              Step 2:  Apply 1 qt. per acre at “Bloom Stage”.

              Step 3:  Apply 1 qt. per acre at “Early Fruit Set”.

 

15.  Strawberries

              Step 1:  Apply 1 gallon per acre at planting.

              Step 2:  Apply 1 qt. per acre at 4 leaf stage.

              Step 3:  Apply 1 qt. per acre at first bloom and every 7 days through peak harvest.

    

16.  Peanuts

              Step 1:  Apply 1 gallon per acre at planting.

              Step 2:  Apply 0.5 gallon at “Pegging”.

              Step 3:  Apply 0.5 gallon per acre at “Bloom Set”.

              Step 4:  Apply 0.5 gallon per acre at “Nut Set”.

 

17.  Rice

              Step 1: Treat 80 to 100 lb. sprouted seed with 0.5 gal of World Harvest, SumaGrow® product mixed in solution.

                Step 2: Apply 1 gallon per acre 30 days after broadcast/drilling.

              Step 3: Apply 0.5 gallon per acre at Flag leaf/Boot leaf/Pre-flowering stage.

       NOTE: Please refer to Item #19 - Seed Treatment, Seedlings, and Transplants.

 

18.  Trees and Shrubs

              Step 1:  Mix equivalent of 3 oz. per gallon and spray from trunk to drip line.

              Step 2:  This application should be made in Spring at bud stage, Summer, and Fall.

 

19. Seed Treatment, Seedlings, and Transplants

SPROUTED SEEDS

          - At Planting (Drill or Broadcast): Treat seed prior to planting @ 0.5 gallon/100 lbs. seed

        - At 30 days:  Apply 1 gallon per acre

        - At Flag leaf/Boot leaf/Pre-flower stage: Apply 1/2 gallon per acre.

 

SEEDLINGS ® TRANSPLANT (25 day old seedlings)

        - At Transplant:  Root dip seedlings in equivalent of 1 gallon per acre
             (Dilution solution equivalent to 6 oz. World Harvest, SumaGrow® per gallon of water)

          - At 30 days:  Apply 0.5 gallons per acre

          - At Flag leaf/Boot leaf/Pre-flowering stage:  Apply 0.5 gallons per acre

 

SINGLE TREATMENT PER SEASON: (Sprout seed in 1 gallon/ 40-80 lbs. seed)

 
                Step 1:  Pre-soak seeds in 1 gallon product (6 oz. per gallon of water).

              Step 2:  Soak for 24-36 hours, drain, place seed in wet cloth sack.

              Step 3:  Over the next 24 hours, turn cloth sack occasionally keeping moist. Keep sack in a shady, warm area.

              Step 4:  Seed can be broadcast/drilled after 24 hours.

 

20.  Cassava Plants

            Two gallons per acre

                Step 1:  Apply 0.5 gallon per acre at planting

                Step 2:  Apply 0.5 gallon per acre 15 days after planting.

                Step 3:  Apply 0.5 gallon per acre 30 days after initial planting.

                Step 4:  Apply 0.5 gallon per acre before flowering.

 

21.  Mango Trees

                Step 1:  Apply 0.5 quart per tree in the planting hole.

                Step 2:  Apply 1 gallon per tree each year in split applications at stages (ex. at beginning of rain season, pruning, flowering, fruit)

 

 22. Durian Trees

         Usual density is 100-150 trees per hectare

             Step 1:  Apply 1 quart per tree each year for the first 3 years.

             Step 2:  Apply 1 gallon per tree during the fourth year in 3 to 4 split applications.

             Step 3:  Apply 0.5 to 1 gallon per tree during fruit-bearing years.

 

 23.  Rambutans

             Step 1:  Apply 0.5 quart per tree at planting.

             Step 2:  Apply 1 gallon per acre before flowering and after initiation of fruit.

 
24.  Longan

             Step 1:  Apply 0.5 quart per tree in two split applications per year for trees less than 3 years old.

               Step 2:  Apply 1 gallon per tree in four split applications per year for trees greater than three years old.

        NOTE:  Application times suggested are one month before harvest, before flowering, at fruit development stage, and right after harvest.

 

25.  Dragon Fruit

             Step 1:  Apply 1 quart per plant at time of planting.

             Step 2:  Apply 1 quart in two split applications (one month after planting and at six months)

 

 26.  Rubber Trees

            Step 1:  Apply 2 gallons per acre while planting.

            Step 2:  Apply 1 gallon per year until ready for tapping.

            Step 3:  Apply 1 gallon after each tapping.


Application Method:  Apply uniformly in circular bands of 30cm width all around the plant (where the roots are active) leaving 7cm from the base followed by slight forking into the top 5-8cm of soil. In the second year, apply in circular bands of 45cm width leaving 15cm around plant base. Continue applications in steadily increasing widths until the distance from the tree is equivalent to twice the canopy. 

 

27.  Pomegranate

             Step 1: Apply 2 gallons per acre or per 100 trees (or 3 ounces diluted in 2 gallons of water per 1,000 sq. ft.)

             Step 2: Repeat application every 10 days for one month.

 
World Harvest Group, SumaGrow can be co-applied with your irrigation water through a metered irrigation system.
SumaGrow can also be applied with liquid Nitrogen and herbicides. Do not mix with fungicides.